# Pedal Box Placement The pedal box is mounted to the floor with four bolts. Removing the nuts from under the car will allow placement of the pedal box where you want it. The gold-colored foot plate will have to be removed to get access from the top. If it’s necessary to move the pedal box further back than the mounting holes provide, then additional holes can be drilled in the mounting rails. If moving the pedal box forward significantly for shorter drivers, it is required to cut slots in the foot plate to clear the steering rack mounting pedestals. --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://manual.rush.sr/readme/break-in-and-initial-setup/pedal-box-placement.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.